AI 2D Floor Plan for a Studio Flat: A Practical Guide

By Lyxvo · Published October 29, 2026 · 5 min read

An AI 2D floor plan for a studio flat lets you test furniture layouts before you move a single sofa. This guide walks you through measuring the space, zoning the open room, placing furniture and turning the result into a shopping list.

A studio flat is one open room with a bathroom and sometimes a small kitchen corner. That openness is its strength and its challenge: without walls, every piece of furniture defines a zone, and a poor layout makes the whole place feel cramped. A 2D floor plan lets you see the room from above, to scale, so you can compare options quickly.

Why a 2D plan works better than guessing

A top-down plan shows what a photo or a mental picture hides: door swing, window sill height, the path between the bed and the bathroom, and whether a wardrobe will block the only route to the kitchen. Working in 2D is also faster. You can move a sofa five times in a minute instead of lifting it five times.

For a studio, the plan has to answer three questions:

• Where does each activity happen (sleeping, working, eating, relaxing, storing)?
• How does a person move from the door to each zone without squeezing past furniture?
• Does the layout still work when the sofa turns into a bed or the table is folded?

Step 1: Measure the room properly

Accurate numbers are the difference between a useful plan and a pretty drawing. Measure:

1. The length and width of each wall, at floor level, in centimetres.
2. Door and window positions, with the distance from the nearest corner.
3. Door swing direction, which often takes away a quarter of a small room.
4. Radiators, sockets, ceiling light position and any ducts or pipes that cannot move.
5. The height of the window sill, which affects where a bed or desk can sit.

Write everything down before you start designing. A common mistake is to draw the room from memory and find out later that a wardrobe does not fit beside the door.

Step 2: Define the zones

In a studio, zones replace walls. Decide which functions you need, then give each one a fixed area. A typical split for a studio of around 30 square metres might be:

These numbers are guidelines, not rules. Adjust them to how you actually live. If you cook daily, give the kitchen more room; if you work from home, give the desk a dedicated corner.

Step 3: Test two or three layouts

Do not settle on the first arrangement. Create at least two versions and compare:

• Option A: Bed on the wall opposite the door. Clear view on arrival, but the sofa may feel like a corridor.
• Option B: Bed on a side wall, sofa as a divider. Better privacy for the sleeping zone and a natural room separator.
• Option C: Bed against the window. Strong light and a view, but check the sill height and curtain space.

For each option, walk the route from the door to the bathroom and to the kitchen on the plan. If you have to turn sideways, the layout is too tight.

Step 4: Check the details that break studio layouts

Small problems add up. Before you finalise, check:

• Can the wardrobe door open without hitting the bed?
• Is there a clear path from the entrance to the bathroom door?
• Does the desk get daylight without being in the glare of the screen?
• Can you reach the sockets for the fridge and lamps without extension cables crossing the floor?
• Does the sofa bed unfold with room to spare?

Step 5: Turn the plan into a decor shopping list

Once the layout works, list every item with its dimensions. This prevents buying a sofa that is 20 cm longer than the space allows. Include width, depth and height for each piece, plus a note on the zone it belongs to. Measure your list against the plan before you order anything.

How to make an AI 2D floor plan in Lyxvo AI

Lyxvo AI's interior design tools can produce 2D floor plans and decor shopping lists, either from scratch or from a photo of the room. The output is a design, not a photorealistic render, which suits layout planning well. You can start from your measurements, or upload a photo to use as a reference for the room's shape.

A workable process:

1. Open the AI interior design page and describe the studio: its size, window and door positions, and the functions you need.
2. Generate the 2D floor plan and check it against your measurements. Correct any wall length or position that does not match.
3. Ask for a second layout with the bed moved to a different wall, then compare the two side by side.
4. Review the generated decor shopping list and confirm dimensions before buying.
5. Export the plan for sharing with a partner or a removal team.

If you want to mock up the look of the zones, you can also explore a room moodboard in the same workflow. For a quick visual of your brand or a presentation of the plan, the free design templates and the AI presentation maker are useful for sharing the result clearly.

Note: AI-generated plans depend on the measurements you provide. Always check the output against a tape measure before you buy furniture or book any work.

Common mistakes to avoid

• Ignoring door swing. A door that opens into the main zone can block a desk or wardrobe.
• Placing the bed in the middle. It removes the sense of separation and makes the room feel like a bedroom with no living space.
• Forgetting the walking path. Furniture that fits in the plan may leave no room to walk.
• Using oversized sofas. Choose depth carefully; a deep sofa can eat half the floor.
• Skipping the storage plan. Studios need vertical storage, under-bed drawers and wall shelves more than anything else.

Quick checklist before you buy

• [ ] Every wall, door, window and fixed element is measured and on the plan.
• [ ] Each zone has its clearance.
• [ ] Walking routes to the bathroom and kitchen are clear.
• [ ] Door and wardrobe swings are checked.
• [ ] Sofa bed or fold-out furniture unfolds in its space.
• [ ] The shopping list matches the plan dimensions.

A studio flat rewards careful planning. With accurate measurements, two or three tested layouts and a checked shopping list, a small room can work for sleeping, living, working and cooking without feeling cramped. Start with your measurements, test the zones on paper, and only then buy the furniture.